Skip to content
Flooring Express
Original Tasmanian Oak boards sanded back and re-finished in a West Hobart cottage.
Portfolio Case Study

West Hobart Cottage: Original Boards Brought Back

A century of paint, carpet tacks and patched boards taken back to bare Tasmanian Oak.

Project Category
Heritage Restoration
Location
West Hobart, TAS
Material Selection
Original Tas Oak + Salvaged Stock
Installation Time
6 Working Days

The Challenge & Vision

Under the carpet were the original boards — along with a century of tack holes, two failed patches in pine, and a band of paint where a wall had been removed. The owners wanted the floor to read as old without reading as damaged, which is a much finer line than a full replacement.

Original cottage boards exposed after carpet removal, showing tack holes and paint.
Salvaged Tasmanian Oak boards let into the original floor and sanded flush.

The Solution

The pine patches came out and were replaced with salvaged Tasmanian Oak of the same period and width, laid to match the existing board runs. We sanded through three grits, filled the tack holes with a matched slurry rather than a uniform filler, and finished in a low-sheen hardwax oil that can be spot-repaired in future without recoating the whole room.

Before and After

I was ready to be told the floor was too far gone. Instead they patched it with timber the same age as the house and now you genuinely cannot tell where the old ends and the new begins.
Alison ReidHomeowner, West Hobart
The completed restored timber floor in the West Hobart cottage.

Inspired by this project?

Tell us about your space and we will walk you through the options, the timeline and the cost.